- Caliber: 38 Special
- Bullet Weight: 158 Grains
- Bullet Style: Hi-Tek Coated Lead Semi-Wadcutter Hollow Point Gas Check
- Case Type: Ducta- Bright 7a Nickel Plated Brass
- Muzzle Velocity: 980 fps
- Muzzle Energy: 337 ft lbs
Hi-Tek coating allows you to enjoy the benefits of a hard-cast projectile and the cleanliness normally seen in copper jacketed/plated rounds.
Hi-Tek is a polymer based compound* that not only reduces fouling in your barrel, but also substantially reduces airborne lead contamination (allowing for use in some indoor ranges). The elimination of the wax lubrication combined with the reduced airborne lead contamination results in considerably less smoke produced with each shot.
*Hi-Tek is NOT nylon, PTFE (teflon), or molybden
All non-jacketed lead bullets, whether it may be cast, hard cast, wad-cutter, etc. ""smoke"" to some degree due to the wax/lube needed in the manufacturing process. With the high performance and velocity we achieve it is nearly impossible to stop this from happening. Higher chamber pressures, higher velocities, and higher temperatures mean more smoke in this case. The only way to create less smoke would be to sacrifice performance, which has never been our goal.
This round was developed with a projectile that is soft enough to expand upon impact, but hard enough to not lead the barrel of a of a normal revolver.
Nickel plated casings with our new nickel plating process provides several key benefits, not limited to but including; improved feeding in all actions of firearms, enhanced corrosion resistance over traditional brass, improved cosmetics, and ease of cleanup during reloading. Nickel plated casings will not tarnish like brass during storage or when in contact with foreign materials such as leather, moisture, and other metals.
Until the development of the Ducta-Bright 7a process, nickel plating casings often limited the number of reloads as compared to raw brass. It was claimed that nickel plated brass casings embrittled the brass therefor making it less desirable for reloaders despite the ease of cleanup that nickel plating offers. In addition, ammunition engineers raising concerns of using nickel plating in very hot +P or magnum loads found that traditional nickel plating often cracked deep-drawn cases, or worse, lead to a total failure. This new process eliminates any concern, to the shooter or reloader, of hazard or ability to re-use the brass.
As with all of Underwood Ammo™ rounds, we utilize flash suppressed powder so that your vision will not be compromised if it becomes necessary to use your firearm in low light.
While taking advantage of our state of the art testing equipment, this high performance ammunition is field tested using popular, real firearms that our customers are most likely to own out in the real world with all the elements you would experience. If for some reason Underwood Ammunition fails to meet performance expectations, we stand by our product 100% and will make sure the customer is satisfied with every purchase.
This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases."